NASA
European Space
Agency
Boeing
United States Air
Force
Oceanit Labs
Sci-Tec
Sensing Strategies
Mitre Corporation
Lockheed Martin
Universities and Colleges
University Of North
Dakota
University of
Wisconsin Lacrosse
Texas A&M
University
Houston Community
College
Keystone College
University of
Washington
Stroudsburg
University
Sheppard University
Appalachian
University
Widener University
University of San
Mateo
Public
Institutions
Franklin Science
Museum
New Mexico State
Parks
Virginia living
Museum
New York Hall of
Science
Tele-Station 6 Add On Split Roof Observatory
Click For Larger Picture
The Tele-Station 6 add on split roof observatory has been
developed for locations where space is limited to permit the
travel of a single roof, or if a customer preference is not
to have any roof support beams extending out of the side of
the observatory .The Tele-Station 6 roof slides in two parts
away from each other, and the support beams for both halves
of the roof overlap on the sides of the observatory,
rendering a very clean and compact design. The two aluminum
roof segments each consist of five panels and overlapping
for an excellent waterproof roof structure.
The Tele-Station 6 is designed for adding onto an existing
sub structure.
Included Features of the
Tele-Station 6 Add On Split Roof Observatory
Construction
All aluminum construction with
Aluminum panels making it 100% corrosion resistant and maintenance
free, no painting or staining required, ever!
Aluminum panels are available in 12
colors, standard.
Insulated wall panels keep the
observatory cool in the hot sun
Roof is white for low heat
absorption.
Lockable, keeping your astronomy
equipment safe.
Do it yourself installation. You
don't need to hire a contractor to install our observatories!!
Installation is a snap due to our modular design!
Unlike observatories made from wood, the all aluminum Tele-Station
will not warp and sag over time
The Tele-Station 6 was wind tested on November 3, 2007. This test was
accomplished in another application, our
Star Traveler Mobile
Observatory. Both the Tele-Station2 and the Star Traveler are
built with the same components and design features both on the main
building portion and roof. The Star Traveler was wind tested when it
was driven from Chicago, Illinois to College Station, Texas, a trip
of 1100 miles, at an average speed of 60 MPH, on an average of 6
hour intervals.
Unique features of the Tele-Station 6:
Unlike other roll-off roof
observatories, the Tele-Station 6 can be totally disassembled and
re-assembled in the event that you have to relocate it!
Easy installation! Walls and roof
bolt together using one (1) tool, a supplied Allen wrench!!!
Unique roof design. Aluminum roof
comes in 5 sections, and have overlapping seams for a complete
waterproof design.
No permanent roller track supports,
our observatories have extendable track supports that roll out with
the roof making it more esthetically pleasing.
The Tele-Station can be operated as
a fully remote observatory system with the
Pier-Tech 2 or
Pier-Tech 3 along with
our
Advanced Observatory Control Software & Hardware from the
comfort of your own home or from another part of the world, with our
optional Wi-Fi or Cell tower communication module.
With the use of our patented height
adjustable pier, you can raise the telescope to view above the
Tele-Station 2 wall. This allows unobstructed views from the horizon
to the zenith in all directions.
Roll Off Roof Observatory Advantages:
Unlike a dome, the Tele-Station 6
does not require complex motors and electronics to move the roof as
the telescope follows the sky.
The Tele-Station reaches thermal
equilibrium faster than a dome, and does not create a chimney effect
as hot air rises out the open slit of the dome.
Permits an unobstructed view of the
sky for naked eye observations and wide field piggyback
astrophotography.
The Tele-Station 6 can be dressed to
match your home. Our unique aluminum framing has slots that run
along the entire Tele-Station sidewalls allowing custom cladding to
be mounted to it.
Additional Features:
The Tele-Station 6 can also be
operated manually.
Just tell us what type of telescope
and mount you have, and we will take care of the rest.
Can be anchored to any type of
floor with our supplied anchoring system.
Product Galleryclick for a larger Picture
10x10 Tele-Station 6 Split Roof
Observatory Back View
Pier-tech and the editorial content,
graphics, and products of the Pier-tech website, unless otherwise noted, are
the products of Pier-Tech, Inc. The information presented on Pier-tech is
copyrighted as collective work. Any unauthorized reproduction, by any means,
mechanical or electronic, without the express written permission of
Pier-tech, Inc. is strictly prohibited.
Copyright 2008, Pier-Tech,
Inc.
All Rights Reserved
Home
)
)
)
)
)
