Telescope Pier Products:
Auto-Pier Software
Latiwedge
Observatory Control
Observatory Solar Power
Pier-Caddy
Pier-Tech 1
Pier-Tech 2
Pier-Tech 3
Pier-Tech 4
Pier-Tech Combos
Robo-Rolloff
Star Traveler Observatory
Tele-Enclosure
Tele-Station 2
Tele-Station 3
Tri-Pier 1
Tri-Pier 2
Vibration Isolation
Company Info:
Home
Contact Us
|
|
|
 |
Motor Option
Part#: RR-MOTOR
Heavy Duty Motor and Gearbox Observatory Roof Drive System.
Our motors come in 1/4, 1/2, 3/4 and 1.0 horse power sizes. Depending on the size of the observatory that you order. We use a rack and pinion design which produces the greatest amount of torque for moving roofs.
Also, our motor drive is mounted in the center of the observatory back wall, instead of on the side of the observatory. This motor position is best, since the roof can me moved evenly, and provides the motor with the best mechanical advantage. This Heavy Duty Motor and Gearbox Observatory Roof Drive System can be used with any roll off roof observatory, not just ours.
Click Here For More Information
A deposit will be taken at the time of your order
|
|
|
|
|
|
 |
Pier-Tech 2 Telescope Pier Option
Part#: RR-PT2
Pier-Tech 2 is an electro-mechanical telescope pier. It is designed for the observer who wishes to raise and lower the pier by a push of a button. To operate the Pier-Tech 2, just plug it into a standard 120V outlet, push the up or down button on the supplied hand held pendant to raise or lower the pier. The pier has 20 inches of precision vertical adjustment keeping your telescope polar aligned and level.
After placing your order, Please contact Pier-Tech to specify what mount and Telescope you will be using with this Pier.
Click Here For More Information
A deposit will be taken at the time of your order
|
|
|
|
|
Pier-Tech 3 Telescope Pier Option
Part#: RR-PT3
Pier-Tech 3 is similar in construction as the Pier-Tech2 except it can withstand greater bending moments and it has an 800-pound lifting capacity. It is designed for the observer who wishes to raise and lower the telescope pier by a push of a button. Pier-Tech 3 is also great for remote control observatories where the full operation of the observatory is done remotely. The pier can be wired to the observatory's main controller for operation. To operate the Pier-Tech 3, just plug it into a standard 120V outlet and push the up or down button on the supplied hand held pendant to raise or lower the pier.
Pier-Caddy, Telescope, and Mount Not Included
After placing your order, Please contact Pier-Tech to specify what mount and Telescope you will be using with this Pier.
Click Here For More Information
A deposit will be taken at the time of your order
|
|
|
|
|
|
|
