|
|
 |
Pier-Tech 2 Telescope Pier
Part#: PT2-110
Pier-Tech 2 is an electro-mechanical telescope pier. It is designed for the observer who wishes to raise and lower the pier by a push of a button. To operate the Pier-Tech 2, just plug it into a standard 120V outlet, push the up or down button on the supplied hand held pendant to raise or lower the pier. The pier has 20 inches of precision vertical adjustment keeping your telescope polar aligned and level.
After placing your order, Please contact Pier-Tech to specify what mount and Telescope you will be using with this Pier.
Click Here For More Information
Price shown is 50% of total cost
|
|
|
|
|
|
|
Pier-Tech2 Telescope Pier
Part#: PT2-220
Pier-Tech 2 is an electro-mechanical telescope pier. It is designed for the observer who wishes to raise and lower the pier by a push of a button. To operate the Pier-Tech 2, just plug it into a standard 120V outlet, push the up or down button on the supplied hand held pendant to raise or lower the pier. The pier has 20 inches of precision vertical adjustment keeping your telescope polar aligned and level.
After placing your order, Please contact Pier-Tech to specify what mount and Telescope you will be using with this Pier.
Click Here For More Information
Price shown is 50% of total cost
|
|
|
|
|
|
 |
Auto-Pier Software & Hardware
Part#: PT2-APCS
Auto-Pier is an add on accessory that allows you to control the Pier-Tech 2 or Pier-Tech 3 via a computer connection. You will now be able to retract or extend the pier via software from your computer. Pier-Tech will provide the hardware and software needed to remotely control your Pier-Tech 2 or Pier-Tech 3 telescope pier.
Click Here For More Information
Price shown is 50% of total cost
|
|
|
|
|
|
 |
Eye Piece Tray Option
Part#: PT2-ET
Stainless Steel eyepiece tray with 15 places for 1 1/4 inch eyepices and 3 spaces for 2 inch eyepieces. Also included are 2 quick release knobs for removing the tray. The eyepiece tray can be used with the PT1, PT2 or PT3 telescope piers and can also be mounted to the inside wall of the Tele-Station observatory.
Price shown is 50% of total cost
|
|
|
|
|
|
 |
Laptop Tray Option
Part#: PT2-LT
Stainless Steel laptop tray measures 9 inches x 9 inches, with gussets for extra strength. Also included are 2 quick release knobs for removing the tray. Tray can also be used for holding beverages or star charts. The laptop tray can be used with the PT1, PT2 or PT3 telescope piers and can also be mounted to the inside wall of the Tele-Station observatory
Price shown is 50% of total cost
|
|
|
|
|
|
 |
Observatory Control 3.0
Part#: OCS
This new software and hardware package boasts many features not found in other observatory automation packages. One main feature is to be able to control either remotely or in the observatory itself, our height adjustable telescope pier. You will be able to raise or lower the pier as part of your observing session automation routine. Our controller hosts stored configuration settings and a microprocessor that can automatically open (or close) the observatory at a specific time or signal (e.g.: cloud sensor) – enabling unattended-automated control of your roll off roof observatory without the need of a pc. The cloud sensor can execute an automated routine consisting of pier down, close roof or open roof, pier up, all with feedback from the position limit switches on the roof and pier. This routine can also be activated from popular observatory control packages such as ACP
Click Here For More Information
Price shown is 50% of total cost
|
|
|
|
|
|
 |
Pier-Caddy
Part#: PT2-PC
* All Aluminum Construction and corrosion resistant fasteners.
* Low Profile Height.
* Custom Leg Lengths included in price up to 25” long.
* Leg and Castor assembly for making your pier or tripod mobile.
Click Here For More Information
Price shown is 50% of total cost
|
|
|
|
|
|
 |
Extra Anchor Plate Option
Part#: PT2-XTP
Price shown is 50% of total cost
|
|
|
|
|
Extra Top Plate Option
Part#: PT2-XTP
Price shown is 50% of total cost
|
|
|
|
|
