Pier-Tech 3 Telescope Pier - Adjustable Height

Click For Larger Picture

Pier-Tech 3 is similar in construction as the Pier-Tech2 except it can withstand greater bending moments and it has a 800 pound lifting capacity. It is designed for the observer who wishes to raise and lower the pier by a push of a button. Pier-Tech 3 is also great for remote control observatories where the full operation of the observatory is done remotely. The pier can be wired to the observatory's main controller for operation. To operate the Pier-Tech 3, just plug it into a standard 120V outlet and push the up or down button on the supplied hand held pendant to raise or lower the pier

Features of the Pier-Tech 3 Telescope Pier

Supplied with 120Volt controller or 12V battery for operation.

Stays level and polar aligned at every height.

Can be made portable with optional legs and castors attachment.
800 pound lift capacity.

Minimum pier height is 28 1/2 inches- 29 1/2 inches, Maximum pier height is 48 1/2 inches- 49 1/2 inches, (all dimensions are +/- 1/2 inch)

Aluminum and powder coated steel construction for corrosion resistance.

Custom machined top plate for your telescope or wedge type included in price.

Great for roll-off roof observatories.

Ergonomic and handicapped accessible.

Great for viewers of different standing heights such as children.

Designed for bigger Telescopes such as Meade LX200 16" or 8" Refractors with large overhung loads



Product Gallery  click for a larger Picture

PT3

Pier-Tech 3

$2800.00